Overheating of coil
1)Over voltage
Remedy: Check & correct terminal voltage/replace with higher voltage coil
2)Under voltage failure of magnet to seal in
Remedy: Correct terminal voltage / replace with lower voltage coil or change transformer tap
3)Inter turn short circuit of Coils (Coil getting excessively hot turned brown in colour)
Remedy: Replace coils
4) Dirt or rust on pole faces increasing the air gap
Remedy : Clean pole faces. Don’t use grease solvents or sharp objects while cleaning
....
Multimotor Applications
-
Many applications require more than one motor. In some instances, one drive
can supply two or more motors. When this happens, the current rating of the
mot...
15 years ago
No comments:
Post a Comment